About Sunsolve Oilaway OL

Oilaway Oil-Lift is designed to remove oil stains from hard surfaces areas such as Engineering workshop floors, Factory Floors, Airport Aprons / Runways, Garage Forecourts, Floors, Car Parks, Driveways, Patios and Paving. It is a clear, colourless formulated liquid blend of surface-active ingredients in an aqueous solution.

Advantages:

Outstanding cleaning power
Non-Flammable
Solvent Free
Quick Penetrating
Easy to use and leaves no harmful residues
Carbonizes oil
Not regulated as an ozone depleter
Rapidly biodegrades after it has performed its task

Instruction for Use:

Wear protective goggles and protective PVC or rubber gloves during use.

For cleaning soiled surfaces initially spray or pour Oilaway Oil-Lift onto the surface to be cleaned, agitate with a hard broom or floor scrubber and allow to penetrate and action for at least four hours prior to hosing off with high pressure water.

NB: For heavily soiled areas scrub the area to be cleaned for at least two minutes, the longer the better.

Do Not mix with any other degreaser / chemical as this will impair the efficiency of the product and pose a safety risk to workers.

Note:

Oilaway Oil-Lift has been formulated as an Oil emulsifier for hard surfaces and should be used as such.

Important

•   The product in its concentrated state is highly corrosive and utmost care must be taken to avoid skin and especially eye contact.
•   Avoid contact on organic material i.e.: leather, cotton and paper[See Msd Safety
•   Work in a well ventilated area
•   Oilaway will rapidly biodegrade after it has actioned, penetrated and lifted the ingressed oil.

[ Back ]

WHO USES SUNSORB™ PRODUCTS?

* Port and Airport Authorities, & Marinas
* Companies specialised in hydrocarbon remediation
* Armies and Navies
* Garages, Service Stations and Workshops
* Fire Protection and Police forces
* Mining industries
* Transport companies.

Sunsorb Hydrocarbon Absorbent and related products